getzjd
asked on
Sonicwall QoS Site - To- Site VPN
We have 1 remote site of our company that runs on a Time Warner business class cable modem. At this site we have a SonicWall running Tz170 Enhanced 3.23.0-6e with a site-to-site VPN connection to our HQ which has a Sonicwall Pro 3060 Enhanced 4.0.0.2-51e. All of our other sites are AT&T T1 MPLS networks with managed COS. The remote site is a vlan interface off our main Adtran core switch at HQ
We have a ShoreTel VoIP system and Layer 3 Adtran 1335 poe switches.
My question, how would I properly setup QoS on the sonicwalls to give the voice traffic priority? The diffserve bit in shoretel is set to 184, which translates to DSCP 46 and is marked by the phones.
This is a very dry 30 page document. http://www.sonicwall.com/downloads/configuring_qos_and_bwm.pdf ... is there anything in here that I may run into as a pitfall or can someone who has implemented this just give me a quick step by step?
We have a ShoreTel VoIP system and Layer 3 Adtran 1335 poe switches.
My question, how would I properly setup QoS on the sonicwalls to give the voice traffic priority? The diffserve bit in shoretel is set to 184, which translates to DSCP 46 and is marked by the phones.
This is a very dry 30 page document. http://www.sonicwall.com/downloads/configuring_qos_and_bwm.pdf ... is there anything in here that I may run into as a pitfall or can someone who has implemented this just give me a quick step by step?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.