Link to home
Start Free TrialLog in
Avatar of duncaninnz
duncaninnz

asked on

Dell drivers for Poweredge 2650

Same driver problem as related question. Can someone clarify exactly how to access this driver update utility. I've downloaded about 6 gigs worth of utilities from the Dell website none of which seem to do anything useful. I have the same two PCI devices showing no driver installed.
Avatar of PriceD
PriceD

Can this server go on the internet.  If so, have you tried to run the Dell wizard current configuration, to allow it to find the drivers on your server?
Avatar of duncaninnz

ASKER

As in the realted question I have been to the support site and downloaded all the drivers and installed them. I have still gotr to items in device manager that havent installed as follows :

PCI\VEN_1028&DEV_000C&SUBSYS_000C1028&REV_00\3&13C0B0C5&0&20
PCI\VEN_1028&DEV_000D&SUBSYS_000D1028&REV_00\3&13C0B0C5&0&22

These show as PCI devices with no driver. Also the server runs like it doesnt have any video driver installed and the USB ports dont work. Plug anything into the USB ports and they show as unknown devices. Its like the chipset drivers arent installed ot something. I have donwloaded about 12 gigs worth of rubbish from the dell drivers website from the system mangement section. I suspect there is some utility to update the drivers but cant find it yet. The related question refers to a download but I have tried that and it did nowt.

I suspect the two items without drivers relate to Embedded remote access and remote access card. These both came up as detected in one of the downloaded utilities but on the website there is only firmware for the deivice.
The service tag is 276F81S
In computer management there is no enhanced usb controller. The server has however been completely updated with the latest patches. I cant run the update utilities which for some bizarre reason run on a boot cd into linux without the thing recognising the usb.
ASKER CERTIFIED SOLUTION
Avatar of duncaninnz
duncaninnz

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial