Link to home
Start Free TrialLog in
Avatar of derhag
derhagFlag for United States of America

asked on

install windows 7 on dell precision 490 no drives found

trying to install windows 7 on dell precision 490, no drives found.
have downloaded esb2 intel matrix driver, win7 confirms hardware match, but still no drives found.
have tried setting bios drive setting to ahci and ata but still no luck.
have googled for answers but no good results.
seagate barracuda 80gb sata drive.
Avatar of David
David
Flag of United States of America image

Since you are doing a cold install, have you verified that it ISN'T a driver problem by attempting at least a partial install of XP, or another O/S?    Since you have a single disk drive, why not disable the RAID mode to begin with?   (Only reason not to is if you plan on mirroring the disk later on)

Avatar of derhag

ASKER

good suggestion dlethe, thx.
Drive is detected correctly by bios. ST380013AS, seagate barracuda 7200.7
Installed known good drive (WD raptor) with XP installed, boots fine to XP.
Run win7 setup from dvd same with known good drive (wd raptor), drive is detected.
Installed new seagate 1.5TB drive, Win7 installing normally.
seems strange, but older seagate drive must not be compat with precision 490 or win7.
ASKER CERTIFIED SOLUTION
Avatar of David
David
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial