troubleshooting Question

Procurve 2610, Cannot ping outside subnet

Avatar of DownsIT
DownsIT asked on
Switches / Hubs
4 Comments1 Solution2896 ViewsLast Modified:
I need some help with a Procurve 2610-24-PWR.

Here's my network config:

All subnet masks are 255.255.0.0

PC1 - 10.199.1.10 (Default Gateway 10.199.1.20)
RJ45 Connection
Router 1 Inside Interface - 10.199.1.20
Router 1 Outside Interface - 10.201.1.1
Leased Line (E1)
Router 2 Outside Interface - 10.201.1.2
Router 2 Inside Interface - 10.150.1.20
RJ45 Connection
Server1 - 10.150.1.1 (Default Gateway 10.150.1.20)

I can ping Server1 from PC1 without any problems at all so there is no routing issues in the router itself.

Okay, now here's my Procurve Switch setup:

PC1 - 10.199.1.10 (Default Gateway 10.199.1.20)
RJ45 Connection
Router 1 Inside Interface - 10.199.1.20
Router 1 Outside Interface - 10.201.1.1
Leased Line (E1)
Router 2 Outside Interface - 10.201.1.2
Router 2 Inside Interface - 10.150.1.20
RJ45 Connection
Procurve 2610 - 10.150.1.2 (Default Gateway 10.150.1.20)

I cannot ping the Procurve 2610 from PC1.  Can anyone explain why please?
From a PC on the same subnet (10.150.0.0) I can ping the Procurve.
If I ping from the Procurve to the other subnet is says "Network is unreachable on this VLAN"
Router is Cisco 871 for information.

Thanks in advance.

; J9087A Configuration Editor; Created on release #R.11.30
 
hostname "GU7 (1)" 
max-vlans 2 
interface 24 
   name "VOIP Maintenance" 
exit
ip default-gateway 10.150.1.20 
ip routing 
no timesync 
snmp-server community "public" Unrestricted 
vlan 1 
   name "Data" 
   untagged 1-23,25-28 
   ip address 10.150.1.2 255.255.0.0 
   no untagged 24 
   exit 
vlan 2 
   name "VOIP" 
   untagged 24 
   ip address 10.151.1.2 255.255.0.0 
   tagged 1-23,25-28 
   voice 
   exit 
fault-finder bad-driver sensitivity high 
fault-finder bad-transceiver sensitivity high 
fault-finder bad-cable sensitivity high 
fault-finder too-long-cable sensitivity high 
fault-finder over-bandwidth sensitivity high 
fault-finder broadcast-storm sensitivity high 
fault-finder loss-of-link sensitivity high 
fault-finder duplex-mismatch-HDx sensitivity high 
fault-finder duplex-mismatch-FDx sensitivity high 
no stack 
password manager
ASKER CERTIFIED SOLUTION
jburgaard

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 4 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 4 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros