b_lick
asked on
Moving Users to a remote location
Hey There,
We are moving 6 users to a new location about 1 Km down the road. They will need to tie into our network here for access to the server.
We currently have a CISCO PIX606e that supports VPN connectivity, but no internet connection when connected to the VPN.
What is my best option for having these 6 users seemlessly intergrate with our network?
We are moving 6 users to a new location about 1 Km down the road. They will need to tie into our network here for access to the server.
We currently have a CISCO PIX606e that supports VPN connectivity, but no internet connection when connected to the VPN.
What is my best option for having these 6 users seemlessly intergrate with our network?
Have a 506e, or other VPN device at both locations. At least one location with a static IP, and create a pptp vpn between the two devices. Two different subnets, 1 at each location with access-lists for each to see the other.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Sounds easy enough.
My next concern is that I want to be using this network for data and for voice. We use an AVAYA IP Office phone system. Do you think I will be needing to have a dedicated Point to Point T1 Line installed? or just high speed internet on both ends?
My next concern is that I want to be using this network for data and for voice. We use an AVAYA IP Office phone system. Do you think I will be needing to have a dedicated Point to Point T1 Line installed? or just high speed internet on both ends?