connecting two 3810 routers

sirimalla16
sirimalla16 used Ask the Experts™
on
i have connected two routers through db 60 to db 60 cross over cable to configure static route. i have used the no shutdown commands on both the routers. When i  type the show ip route, it doesnt display ( C  20.0.0.0/8 directly connected serial 0) and no green leds on both routers.what would be the reason
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Author

Commented:
one end of the DB 60 is DTE and other end is DCE. On the DCE end i am unable to set the clock rate.I thing these would be the problem, so can any body tell how to set the clock rate.
Head of IT Security Division
Top Expert 2010
Commented:
HI,

Please configure on the router where the DTE cable connected configure the following:

int ser 0
 clock rate xxxxxxxxx


it is usable upto 8Mbps

Best regards,
Istvan

Author

Commented:
Its working

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial