troubleshooting Question

Setup IPSec L2L VPN on Cisco ASA 5505 in Transparent mode

Avatar of mmsheff
mmsheff asked on
VPNHardware FirewallsInternet Protocol Security
13 Comments1 Solution2839 ViewsLast Modified:
Hello. I have tried to find the VPN wizard in the GUI, which is not there. Have also tried many sample configurations from the web without any luck.

Previously had this working fine with a Sonicwall Pro 4060 and a Vigor 2930 but we've added a second site for this one remote box with the Cisco.

Here is the network.

Cisco Side: IP y.y.y.1 with a lan of y.y.y.y 255.255.255.0

Remote (connecting to Cisco) side: IP x.x.x.34
Internal LAN: 172.zz.zz.0 255.255.255.0

Any advice on how to set this up, or pointers to any good guides would really be appreciated.

Thanks!
ASKER CERTIFIED SOLUTION
prvnkumark

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 13 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 13 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros