Balack
asked on
Does this ADSL connection is ok?
This is a newly-commissioned ADSL line, using Cisco 877 router. This is believed using PPPoE, with ppp user authentication done by the ISP contractor.
Upon connecting, I did a quick check from the router. I typed "sh dsl int atm0", and the result is shown in the attachment.
However, what surprise me is the "capacity used" shown 100% on the ATU-C (ISP site). Does this means connection may not stable? What else can I do?
router-1-dsl-result.txt
Upon connecting, I did a quick check from the router. I typed "sh dsl int atm0", and the result is shown in the attachment.
However, what surprise me is the "capacity used" shown 100% on the ATU-C (ISP site). Does this means connection may not stable? What else can I do?
router-1-dsl-result.txt
ASKER
This ADSL line is 10M. Does it means that I can use up to 10Mb for the bandwidth?
ASKER
BTW, how to check what is the bandwidth usage at any time?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Good
Greg