• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1104
  • Last Modified:

Cisco Aironet 1142 and Microsoft IAS

I have a cisco 1142 wireless access point in autonomous mode that I am trying to setup with my IAS server. I currently have IAS working with a ASA and authenticating users against AD but cant seem to get it to work with the wireless AP. Is there a guide to walk me through this? I have found alot of documentation on CIsco's website but it only shows setting up the AP side. Do I need to install a CA to get this to work?
0
phil435
Asked:
phil435
  • 2
1 Solution
 
Jakob DigranesSenior ConsultantCommented:
you don't need a CA - but it's best to do it.

in addition to configure AP - you also need to configure remote access policies on IAS/Radius server and Wireless Security Profile (GPO) on users og computers OU.
take a look here: http://www.microsoft.com/downloads/details.aspx?familyid=0f7fa9a2-e113-415b-b2a9-b6a3d64c48f5&displaylang=en

Let me know if you need more explaining
0
 
phil435Author Commented:
Thanks. Never could get it to work without defining a CA. It would give me authentication failure on client without a certificate.
0
 
Jakob DigranesSenior ConsultantCommented:
good work.

 But, depending on how you set up the Wireless GPO settings - CA is optional. But has to be the same on both ends :-)
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

WEBINAR: 10 Easy Ways to Lose a Password

Join us on June 27th at 8 am PDT to learn about the methods that hackers use to lift real, working credentials from even the most security-savvy employees. We'll cover the importance of multi-factor authentication and how these solutions can better protect your business!

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now