UBCD4WIN DriveImage XML

Having issues with UBCD4WIN when doing drive images.

It seams to me that once I have created the image I can not put the image back onto a new drive.

Even if I do a disk to disk I just goes to a black screen with a flashing cursor.

Where am I going wrong.
LVL 3
Bransby-ITAsked:
Who is Participating?
 
torimarConnect With a Mentor Commented:
Try formatting the new HD before restoring the image.
Also: if the old, mirrored drive had bad sectors, then DriveImage is known to fail:
http://www.experts-exchange.com/Storage/Backup_Restore/Q_24332256.html

I suggest you download and use the free Easeus' Disk-Copy instead: http://www.easeus.com/disk-copy/
It uses sector-by-sector cloning, hence will not be affected by a partly faulty drive.
0
 
heat_z0neConnect With a Mentor Commented:
Try Acronic works great with all HDD diiff size , sata pata

BOB
0
 
nobusConnect With a Mentor Commented:
if i suspect a bad disk, i would first run a diag to know it's status, you can find the diags on ubcd :  http://www.ultimatebootcd.com/      
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.