?
Solved

Perflib ASP Event ID's

Posted on 2009-12-24
4
Medium Priority
?
1,060 Views
Last Modified: 2012-05-08
I'm not sure whats going on with my server here, but I'm running xenapp web interface on this server and running into some wierd issues.

I receive event id 1005 then 1018 immediately following. Any help would be greatly appreciated.


Event Type:	Error
Event Source:	Perflib
Event Category:	None
Event ID:	1005
Date:		12/24/2009
Time:		11:01:59 AM
User:		N/A
Computer:	VENTXEN1
Description:
Windows cannot access the file Ÿƒ ˆÊƒ`爟 for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll because of this error.

Program: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll
File: Ÿƒ ˆÊƒ`爟

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
	- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
	- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: ASP.NET
Disk type: %4

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7f 00 00 00               ...    

-------------------------------------------------------------

Event Type:	Error
Event Source:	Perflib
Event Category:	None
Event ID:	1018
Date:		12/24/2009
Time:		11:01:59 AM
User:		N/A
Computer:	VENTXEN1
Description:
Performance counter data collection from the "ASP.NET" service has been disabled for this session due to one or more errors generated by the performance counter library for that service. The error(s) that forced this action have been written to the application event log.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Open in new window

0
Comment
Question by:ValleyENT
  • 2
4 Comments
 
LVL 37

Accepted Solution

by:
Carl Webster earned 1500 total points
ID: 26161915
What troubleshooting steps have you already taken?
Have you run chkdsk /f /r on all the server's hard drives?
0
 
LVL 4

Author Comment

by:ValleyENT
ID: 26167047
No, but I doubt this is a hard disk issue on 3 physical blades. I'm done alot of research on this issue, and none of them seem to match/fix the problem.
0
 
LVL 4

Author Closing Comment

by:ValleyENT
ID: 31669824
Thank you.
0
 

Expert Comment

by:gimre6
ID: 32968458
I have had the same problem, solved it by adding som ASP.NET counters to Performance monitor, then reboot server and remove counters from Perfmon.
0

Featured Post

Free Tool: Path Explorer

An intuitive utility to help find the CSS path to UI elements on a webpage. These paths are used frequently in a variety of front-end development and QA automation tasks.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If your vDisk VHD file gets deleted from the image store accidentally or on purpose, you won't be able to remove the vDisk from the PVS console. There is a known workaround that is solid.
This article provides a convenient collection of links to Microsoft provided Security Patches for operating systems that have reached their End of Life support cycle. Included operating systems covered by this article are Windows XP,  Windows Server…
How to install and configure Citrix XenApp 6.5 - Part 1. In this video tutorial we have explained step by step installation of Citrix XenApp 6.5 Server on Windows Server 2008 R2 is explained in this video. We have explained the difference between…
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.

850 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question