?
Solved

Cisco 877 Small Business Point to Point VPN & Internet access

Posted on 2009-12-25
2
Medium Priority
?
290 Views
Last Modified: 2012-05-08
Folks,

I an trying to build a small business network with two Cisco 877's connecting to an ISP with static addressing.

I have successfully created a point to point VPN connection between the two sites and can access hosts on either side. Problem is I cannot access the internet from the remote site when the Point to Point VPN connection is up.

I am only new to Cisco IOS....

Any ideas?
burton-remote.txt
0
Comment
Question by:FredNurk
2 Comments
 
LVL 3

Accepted Solution

by:
simprix earned 1000 total points
ID: 26123441
It looks like you aren't natting on the remote router. You need something like this.

access-list 2 permit 10.1.1.0
ip nat inside source list 2 dialer0 overload
0
 

Author Closing Comment

by:FredNurk
ID: 31669983
Perfect, thanks for the help!
0

Featured Post

 The Evil-ution of Network Security Threats

What are the hacks that forever changed the security industry? To answer that question, we created an exciting new eBook that takes you on a trip through hacking history. It explores the top hacks from the 80s to 2010s, why they mattered, and how the security industry responded.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question