Exchange 2007 - Test-SystemHealth (Upgrading servicepack 2)

Hi all

I need to Install service pack 2 on a Exchange 2007 Server ,

Before I can Install service pack 2, i need to go thru some tests , and here are 2 test which fails

any suggestions what I can do ?


Test-SystemHealth
WARNING: Microsoft Filter Pack is not found on server
Myservername . It is recommended that you install Microsoft Filter
 Pack on server Myservername so that Exchange Search can index
and search Microsoft Office 2007 attachments.
WARNING: The Scalable Networking Pack is installed on server
Myservername and its network offloading features are enabled.
Make sure the latest network card, storport.sys, and SAN drivers are installed
to avoid performance and reliability problems.

Test2

Here I get some errors

Test-OutlookWebServices

                        Id                       Type Message
                        --                       ---- -------
                      1003                Information About to test AutoDisc...
                      1007                Information Testing server Myservername
                      1019                Information Found a valid AutoDisc...
                      1005                      Error When accessing https:/...
                      1006                Information The Autodiscover servi...
                      1011                      Error When querying Availabi...
                      1016                      Error [EXCH]-Error when cont...
                      1015                    Success [EXCH]-Successfully co...
                      1014                    Success [EXCH]-Successfully co...
                      1013                      Error When contacting https:...
                      1016                      Error [EXPR]-Error when cont...
                      1015                    Success [EXPR]-Successfully co...
                      1014                Information [EXPR]-The UM is not c...
                      1013                      Error When contacting https:...
                      1017                      Error [EXPR]-Error when cont...
                      1006                    Success The Autodiscover servi...
                      1021                Information The following web serv...
johnfreakAsked:
Who is Participating?
 
MesthaConnect With a Mentor Commented:
Your URLs aren't configured correctly.
It is attempting to connect to external IP addresses rather than internal.
That usually means that you have setup the internal URLs on the virtual directories wrong.
That isn't something that Exchange does on its own, so someone has changed the configuration.

You can't have any Outlook 2007 clients, because if you did, with the URLs set incorrectly Outlook wouldn't be working.

You need to correct that. You also need to have a SAN/UC certificate on the server that matches the host name you are using internally.

Simon.
0
 
tmcgrCommented:
hello ,

1st all

for the Microsoft Filter Pack download this
http://www.microsoft.com/downloads/details.aspx?FamilyId=60C92A37-719C-4077-B5C6-CAC34F4227CC&displaylang=en

and run again system health check

2nd what server do you use?
What Nics?
What storage?

3d your OWA is woking?

Regards
TMC
0
 
MesthaCommented:
Both of the resolutions are easy enough.
The missing filter pack though will not stop you from installing the Service Pack.

The second error is resolved by doing what it says - ensuring that you have the latest drivers installed for all networking components. You must be on Windows 2003, so ensure the server is fully patched.

I would also suggest that you run the Exchange best practises tool from the Toolbox, which will direct you to fixes for both warnings.

Simon.
0
 
johnfreakAuthor Commented:
Hi Guys

Thnks alot for feed back :)

I have updated everything , so the the first test is ok now

but I still get som errors in Test-OutlookWebServices

I Have no problems connecting to HTTPS when i copy the URL in browser , but why do i get errors in the test

Test-OutlookWebServices

          Type Message
          ---- -------
   Information About to test AutoDisc...
   Information Testing server Myservername
   Information Found a valid AutoDisc...
   Information The Autodiscover servi...
       Success [EXCH]-Successfully co...
       Success [EXCH]-Successfully co...
       Success [EXCH]-Successfully co...
         Error When contacting https:...
         Error When contacting https:...
         Error [EXPR]-Error when cont...
       Success [EXPR]-Successfully co...
   Information [EXPR]-The UM is not c...
         Error When contacting https:...
         Error When contacting https:...
         Error [EXPR]-Error when cont...
       Success The Autodiscover servi...
   Information The following web serv...


Test-OutlookWebServices | fl


Id      : 1003
Type    : Information
Message : About to test AutoDiscover with the e-mail address Exchsrvadmin@Mydomain

Id      : 1007
Type    : Information
Message : Testing server Myservername with the published name https://mydomain/EWS/Exchange.asmx & https://mail. Mydomain /EWS/Exchange.a
          smx.

Id      : 1019
Type    : Information
Message : Found a valid AutoDiscover service connection point. The AutoDiscover
           URL on this object is https:// Mydomain /Autodiscover/Autodiscov
          er.xml.

Id      : 1006
Type    : Information
Message : The Autodiscover service was contacted at https:// Mydomain /Auto
          discover/Autodiscover.xml.

Id      : 1016
Type    : Success
Message : [EXCH]-Successfully contacted the AS service at https:// Mydomain./EWS/Exchange.asmx. The elapsed time was 15 milliseconds.

Id      : 1015
Type    : Success
Message : [EXCH]-Successfully contacted the OAB service at https:// Mydomain /EWS/Exchange.asmx. The elapsed time was 0 milliseconds.

Id      : 1014
Type    : Success
Message : [EXCH]-Successfully contacted the UM service at https:// Mydomain /UnifiedMessaging/Service.asmx. The elapsed time was 15 milliseconds
          .

Id      : 1013
Type    : Error
Message : When contacting https:// Mydomain /EWS/Exchange.asmx received
           the error Unable to connect to the remote server

Id      : 1013
Type    : Error
Message : When contacting https:// Mydomain /EWS/Exchange.asmx received
           the error No connection could be made because the target machine act
          ively refused it 193.88.32.198:443

Id      : 1016
Type    : Error
Message : [EXPR]-Error when contacting the AS service at https:// Mydomain /EWS/Exchange.asmx. The elapsed time was 906 milliseconds.

Id      : 1015
Type    : Success
Message : [EXPR]-Successfully contacted the OAB service at https:// Mydomain /EWS/Exchange.asmx. The elapsed time was 0 milliseconds.

Id      : 1014
Type    : Information
Message : [EXPR]-The UM is not configured for this user.

Id      : 1013
Type    : Error
Message : When contacting https:// Mydomain /Rpc received the error Una
          ble to connect to the remote server

Id      : 1013
Type    : Error
Message : When contacting https:// Mydomain received the error No
          connection could be made because the target machine actively refused
          it 193.88.32.198:443

Id      : 1017
Type    : Error
Message : [EXPR]-Error when contacting the RPC/HTTP service at https:// Mydomain Rpc. The elapsed time was 578 milliseconds.

Id      : 1006
Type    : Success
Message : The Autodiscover service was tested successfully.

Id      : 1021
Type    : Information
Message : The following web services generated errors.
              As, in EXPR
              Contacting server in EXPR
          Please use the prior output to diagnose and correct the errors.
0
All Courses

From novice to tech pro — start learning today.