Error - VPN IKE - Payload processing failed

Posted on 2009-12-28
Medium Priority
Last Modified: 2012-06-27
I have a Sonicwall NSA 3500 and a TZ190 doing point to point VPN, On the 3500 I get tons of errors "Error - VPN IKE -       Payload processing failed, but no errors on the TZ logs. Everything seems to be working 100% fine.
Question by:EGSAdmin
LVL 81

Assisted Solution

arnold earned 500 total points
ID: 26135600
Could you check what your MTU settings are on each?

might be that you have not opened all the necesary ports for the VPN.
If you are using IPSEC, do you have UDP 4500 open for Nat-Traversal on the 3500 (I think your tz190 connects to the NSA3500?

Accepted Solution

EGSAdmin earned 0 total points
ID: 26140878
Thanks for the reply, I ended up just recreating the tunnel and the issue went away...

Featured Post

New feature and membership benefit!

New feature! Upgrade and increase expert visibility of your issues with Priority Questions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Let’s list some of the technologies that enable smooth teleworking. 
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
When cloud platforms entered the scene, users and companies jumped on board to take advantage of the many benefits, like the ability to work and connect with company information from various locations. What many didn't foresee was the increased risk…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question