Asfour Crystal
asked on
active directory with 2 different subnet
hi all
I have DC running windows server 2008 with DNS and DHCP and my ip range ( 192.168.1.0) mask ( 255.255.240.0 ) it contain both servers and clients IP
son i plan to make 2 Vlan the firest one contain servers and DC ( it will be in the same old range 192.168.1.0 ) and i will add second ip for DC to contact the other clints VLAN
and i will create new subnet VLAN2 ( 10.0.0.0 mask 255.255.240.0 ) and move all clients to it
and make routing between the 2 VLANS
so is this plan will enable clients to contact normally with DC and other Servers like ISA
or not ? and how to prepare DC and DNS for that ?
and if this will make problems what is the good idea to make my plan work ?
I have DC running windows server 2008 with DNS and DHCP and my ip range ( 192.168.1.0) mask ( 255.255.240.0 ) it contain both servers and clients IP
son i plan to make 2 Vlan the firest one contain servers and DC ( it will be in the same old range 192.168.1.0 ) and i will add second ip for DC to contact the other clints VLAN
and i will create new subnet VLAN2 ( 10.0.0.0 mask 255.255.240.0 ) and move all clients to it
and make routing between the 2 VLANS
so is this plan will enable clients to contact normally with DC and other Servers like ISA
or not ? and how to prepare DC and DNS for that ?
and if this will make problems what is the good idea to make my plan work ?
To create subnet:
http://technet.microsoft.com/en-us/library/cc740187(WS.10).aspx
To associate subnet with site:
http://technet.microsoft.com/en-us/library/cc780426(WS.10).aspx
Then run netdiag /fix
http://technet.microsoft.com/en-us/library/cc740187(WS.10).aspx
To associate subnet with site:
http://technet.microsoft.com/en-us/library/cc780426(WS.10).aspx
Then run netdiag /fix
ASKER
Create a subnet in AD sites & Services
is this enough for DC to comunicate with new subnet users or i must add seconed ip adress in DC LAN card
is this enough for DC to comunicate with new subnet users or i must add seconed ip adress in DC LAN card
ASKER
and for you information sir my DC running server 2008 is that make any different in steps and use netdiag /fix
HI,
Creating subnet is enough make sure that vlan is configured to access resources from VLAN2 to VLAN1.
Please confirm is DC is in VLAN1 or VLAN2?
Make sure that DC can be pinged from both network...!
Creating subnet is enough make sure that vlan is configured to access resources from VLAN2 to VLAN1.
Please confirm is DC is in VLAN1 or VLAN2?
Make sure that DC can be pinged from both network...!
What netdiag /fix does in this is it will append the updated subnet in DNS so it is used to locate the DC from both network
ASKER
DC is in the subnet that already exist and it will be VLAN 1
and i will creat VLAN 2 and move all clients to it
and i will creat VLAN 2 and move all clients to it
Can VLAN2 pings VLAN1?
ASKER
how can i sure that netdiag /fix successfully append the updated subnet in DNS ?
what changes that i can see in DNS?
what changes that i can see in DNS?
ASKER
to which site should I associate the new subnet ? the defualt one or create site for the new subnet ?
ASKER
yes sir
VLAN2 pings VLAN1
VLAN2 pings VLAN1
ASKER
anyone help?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Create a subnet in AD sites & Services and map the subnet to the present site where the DC is located.
After created the Subnet wait till the subnet replicates to all the DC and then run Netdiag /fix so it will be fixed in DNS..!
Let me know if you have any questions on the same..!