chikagoh
asked on
Cisco Call Manager Express voice translation-rule
Greetings,
I have a series of extensions ranging from 101 through 200. In order to get to our voicemail system (hosted elsewhere via SIP), I need to prepend 999 to the extension
So instead of the sip header: sip:101@mysipprovider I need to send: sip:999101@mysipprovider
I have tested a manual translation, which works fine, but I am limited to 15 rules which won't work.
(this works)
voice translation-rule 1
rule 1 /^101/ /999101/
So I need an expressed-based translation-rule that will make this happen for all the extensions.
Thanks!
I have a series of extensions ranging from 101 through 200. In order to get to our voicemail system (hosted elsewhere via SIP), I need to prepend 999 to the extension
So instead of the sip header: sip:101@mysipprovider I need to send: sip:999101@mysipprovider
I have tested a manual translation, which works fine, but I am limited to 15 rules which won't work.
(this works)
voice translation-rule 1
rule 1 /^101/ /999101/
So I need an expressed-based translation-rule that will make this happen for all the extensions.
Thanks!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Example 4
voice translation-rule 5
rule 1 /^0+/ /909/
So for your config
voice translation-rule 1
rule 1 /^1+/ /999/
Greg