asked on

How to create vlans on watchguard x550e router

Hi,

I would like to create vlans on watchguard x550e router. Can someone provide me the steps to created them?

these are the following subnets I would like to create;

1) 10.1.1.0 255.255.255.0 vlan ID: 1
2) 10.1.2.0 255.255.255.0 vlan ID: 2
3) 10.1.3.0 255.255.255.0 vlan ID: 3

note: all three vlans need to go out the same WAN interface for internet access

Fo the vlans to be able to access each other how would I set up the firewall rules for this. Can some one provide the steps for this.

Can some provide me the instructions on how to create the VLAN's? Please take note that I have configured the router and I am currently using 10.1.1.0 in the router on a production network and it is working fine. I just want to add it and the other two in to separate vlans.

thanks,

ASKER CERTIFIED SOLUTION

dpk_wal

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

Murrdog

ASKER

Thanks dpk_wal for the response and instructions. I am using using system manager 9.1. I will try your suggestions in afew days and let you know the results. Thanks.

dpk_wal

Solution was proposed; author was to respond with results.

Thank you.

dpk_wal

Steps to create VLAN were provided so comment 26169531 should be accepted as answer.

Thank you.

dpk_wal

There was a problem with the connection and was not able to upload the answer directly; hence posted as attachment.

If problem persists would have no option but to post as attachment :( [have tried different browsers but looks like this problem is with connection than a browser problem]

Thank you.