Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1370
  • Last Modified:

2 wan static ip addresses - how to set up with one shaw modem

I have a customer that has two static IP addresses from Shaw and a small range of dynamic IP addresses that I would like to set up for them. Currently they are using only one of the static IP addresses. I would like to use the other static IP address in a way that would allow me to set a default gateway of the second IP address for all the workstations on the network but still comunicate with the server.

Since I only have one WAN connection (Shaw cable modem) I am unsure of how to configure this. What hardware will I need to set this up?

Thanks
0
johnbowden
Asked:
johnbowden
1 Solution
 
Istvan KalmarSenior Network EngineerCommented:
what said the ISP, could you post the paper?

Subnet mask, gw?
0
 
johnbowdenAuthor Commented:
I was able to set this up without any problems. I used two routers that were plugged into a 5 port switch and a network cable running from the 5 port switch to the shaw modem. Set the statics for each router, set the default gateway in DHCP on the server, restarted the pc and all is good.
0

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Tackle projects and never again get stuck behind a technical roadblock.
Join Now