Install Exchange 2010 with Windows 2008 R2

Hi everybody.
I see problem a bout install Exchange 2010 with Windows server 2008, before I install AD 2008 it's ok and I install any packet:
 _Microsoft .NET Framework 3.5
 _Windows Remote Management (WinRM) 2.0 CTP 3
 _Windows PowerShell 2.0 CTP 3 and Install Exchange 2010 on the member server  but it's error I have a picture below.
Please help me solution this.
Best regards.
ex2010.JPG
vanlangxAsked:
Who is Participating?
 
leakim971PluritechnicianCommented:
Update or reinstall your NIC drivers or try another one.
Could you check your hardware in device manager ?

Don't forget to enable ipv6.
0
 
leakim971PluritechnicianCommented:
Hello vanlangx,

We can see the server have a network connectivity problem. You have a yellow exclamation point on the network icon.

Regards.
0
 
Glen KnightCommented:
goto Start > Run > Services.msc
locate the TCP/IP NetBIOS helper service right click and select propertied
make sure it is set to automatic and then click start.

i would also recommend if you havent already running the pre-requisite script here:
http://technet.microsoft.com/en-us/library/bb691354.aspx

please note the different script for Windows 2008 R2
0
Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

 
Rajith EnchiparambilOffice 365 & Exchange ArchitectCommented:
0
 
Glen KnightCommented:
Installing tge pre-requisites should sort it out
0
 
Satya PathakLead Technical ConsultantCommented:
What is the status of IPV6?
It should be enable when you installed a hub transport server role?
enable it or install it and then run setup.exe again.

0
 
Glen KnightCommented:
Yes make sure you have not turned off IPv6 if you have done this because you don't run IPv6 DNS servers then see here for how to coexist: http://technet.microsoft.com/en-us/library/cc738372(WS.10).aspx
0
 
vanlangxAuthor Commented:
Thanks you Everybody.
I have checking all the system and i see the problem this:
_When I logon by admin local of menber server (Ex2010) it's ping to server AD it's OK but I logon by User (testex) assign Permission Admin,Enter,schema,domain admin by server AD I ping to server AD but it's not OK, althought I off firewall. I have some picture below.
IP-ex10.JPG
service-ex10.JPG
0
 
vanlangxAuthor Commented:
I don't know what's the happen. Please help me to solution this.
Best regards.
0
 
Glen KnightCommented:
Yes try another NIC or driver either one or the other is not functioning
0
 
leakim971PluritechnicianCommented:
Thanks for the points and for your work @alanhardisty! Have a good week!
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.