?
Solved

Eigrp Filter Cisco 3845

Posted on 2010-01-11
1
Medium Priority
?
256 Views
Last Modified: 2012-05-08
Thanks to the help of some experts here i now have a router and ASA exchanging routes via EIGRP.

What i now need to do is filter out all static routes except ones coming from an GRE Tunnel.

Here is a piece of the routing table:

S    192.168.61.0/24 [1/0] via 172.25.3.1
C    192.168.90.0/24 is directly connected, GigabitEthernet0/1
S    192.168.75.0/24 [1/0] via 172.25.3.1
S    192.168.93.0/24 [1/0] via 172.25.3.1
S    192.168.43.0/24 [1/0] via 172.25.3.1
S    192.168.9.0/24 [1/0] via 172.25.3.1
S    192.168.126.0/24 is directly connected, Tunnel0
S    192.168.111.0/24 [1/0] via 172.25.3.1
S    192.168.92.0/24 [1/0] via 192.168.90.1

I only want to advertise:
S    192.168.126.0/24 is directly connected, Tunnel0

is this possible?

Thanks


0
Comment
Question by:nhidalgo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 22

Accepted Solution

by:
Jody Lemoine earned 2000 total points
ID: 26287318
If you're trying to filter which static routes your router redistributes to the ASA, you can add a route map to the static redistribution on the EIGRP process:

ip prefix-list Static permit 192.168.126.0/24
!
route-map Redistribute
 match ip address prefix-list Static
!
router eigrp 1
 redistribute static route-map Redistribute

Only static routes covered by the prefix list will be redistributed.
0

Featured Post

Visualize your virtual and backup environments

Create well-organized and polished visualizations of your virtual and backup environments when planning VMware vSphere, Microsoft Hyper-V or Veeam deployments. It helps you to gain better visibility and valuable business insights.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question