[Webinar] Streamline your web hosting managementRegister Today

x
?
Solved

Loading ASDM to GNS3 PIX firewall

Posted on 2010-01-12
10
Medium Priority
?
1,880 Views
Last Modified: 2012-06-21
Hi Guys,

Please am trying to setup a PIX firewall lab with GNS3 using ASDM, and be able to use a loopback address on my windows XP laptop.
I have got the lab setup, I can drag and drop the emulated devices, my problem is that after configuring the base requirement, I need to setup my windows XP laptop as TFTP server, so that I can load the ASDM to the GNS3 PIX 525.
I cannot ping from the PIX firewall to the loopback interface setup on my laptop

Below is my base config.
Please help.


PIX Version 7.2(2)
!
hostname Gbolabo
domain-name imostnet.com
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!
interface Ethernet0
 nameif outside
 security-level 0
 ip address 10.10.10.1 255.255.255.0
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.1.1.1 255.255.255.0
!
interface Ethernet2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface Ethernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns server-group DefaultDNS
 domain-name imostnet.com
pager lines 24
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 10.1.1.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 192.168.0.3 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
http server enable
http 192.168.0.3 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
!
!
prompt hostname context
Cryptochecksum:f9e908ed3f78068cd618824b73831184
: end

0
Comment
Question by:lawre1108
  • 6
  • 2
9 Comments
 
LVL 58

Accepted Solution

by:
Pete Long earned 1500 total points
ID: 26292285
You cant by default ! - to make it work you need to install fiddler on the ASDM client and get it to interrupt the ASDM traffic and inject the model number - although not with GNS see my website here http://www.petenetlive.com/KB/Article/0000052.htm
 
0
 

Author Comment

by:lawre1108
ID: 26292544
Hi Pete,

Thanks for the reply, I have seen the video Install and use ASDM in a Virtual Cisco ASA, according to that video, you indicated that you build virtual ASA from previous video.
Could you kindly add that video link for me to watch, I guess that will give me more insight on how the virtual ASA in build.

Thanks for your support
0
 
LVL 9

Expert Comment

by:Vito_Corleone
ID: 26292670
0
Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

 
LVL 58

Expert Comment

by:Pete Long
ID: 26296996
0
 

Author Comment

by:lawre1108
ID: 26313222
Thank Pete,

Sorry for late respond, I was very busy at work yesterday; I couldnt get time to look at the exchange updates.

I will update you on my progress, I hope to start looking at it tonight, and work on it through the weekend.

Once again thanks for the respond
0
 

Author Comment

by:lawre1108
ID: 26313232
Sorry Vito,
I meant to say thanks as well, I will be looking at both solution and hopefully get me somewhere.
0
 

Author Comment

by:lawre1108
ID: 26325117
Hi Pete,

Am trying to map my laptop card to the VMWare, but am getting operating system not found on VMWare, as attached to this comment.

The laptop is connected to the internet via  DSL in my house.

I have zero knowledge on VMware, I will be grateful if you can advice on how I can resolve this.



VMware-error.doc
0
 

Author Comment

by:lawre1108
ID: 26330326
Hi Pete,

You may or may not have seen my previous message, please disregard the massage, I have manage to resolve it.

Am still working on the video, I will update you of my progress, as always, thanks for your support.
0
 

Author Closing Comment

by:lawre1108
ID: 31676033
Manage to use just loopback on windows
0

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
In this article, we’ll look at how to deploy ProxySQL.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
There's a multitude of different network monitoring solutions out there, and you're probably wondering what makes NetCrunch so special. It's completely agentless, but does let you create an agent, if you desire. It offers powerful scalability …
Suggested Courses

590 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question