FelipeSchneider
asked on
Cisco ASA 5505 ACL log
Theres a way to log any connection that was permitted by an ACL?
I create an ACL to permit HTTP access (restrict to my clients) and I need to know when the clients used this connection.
Thanks,
Felipe.
I create an ACL to permit HTTP access (restrict to my clients) and I need to know when the clients used this connection.
Thanks,
Felipe.
You will need to enable logging http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807c35e7.shtml
Hi
you can use the ASDM syslog to check who is passing through your ACL
you can use the ASDM syslog to check who is passing through your ACL
Ther than that you will need somethird party app like http://www.manageengine.com/products/firewall/
ASKER
Ok, but where this log will be avaliable?
Theres a way to send this log by mail? Or save in directory?
My target is enter on day in week, and get all the access from past week.
Thanks,
Felipe
Theres a way to send this log by mail? Or save in directory?
My target is enter on day in week, and get all the access from past week.
Thanks,
Felipe
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Looks like a simple query to me. You can add the 'log' keyword for a permit access-list to see the log.
Enable logging on the device though;
http://www.ciscopress.com/articles/article.asp?p=424447&seqNum=3
Cheers,
rsivanandan
Enable logging on the device though;
http://www.ciscopress.com/articles/article.asp?p=424447&seqNum=3
Cheers,
rsivanandan