Ridenour63
asked on
evo n620c lcd display disassembly
I have a Comaq Evo N620c that the display is bad on. I ordered a replacement LCD display and it has arrived. As this is the first LCD I have replaced, I am having a hard time with the disassembly. I am close to having it disassembled though. I am down to the LCD panel itself and it appears that the only other part is the black front of the display frame. I removed the screws on the sides of the LCD that hook it to the "frame." But, I am unsure of how the LCD display is secured to the frame on this unit. It appears there is some type of glue or tape but I am afraid to pry it apart without knowing. I can post pictures if you like. Thanks so much.
ASKER
Thanks..I had these manuals..and I had it all disassembled except the very last part. I need to replace just he LCD screen now. See attached files...thanks !
IMG00709-20100130-1903.jpg
IMG00710-20100130-1904.jpg
IMG00709-20100130-1903.jpg
IMG00710-20100130-1904.jpg
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
good advice.
Just scroll down a bit to the Service and maintenance information section
I haven't checked but it definitely should have a step by step... they all have