Why Experts Exchange?
Experts Exchange always has the answer, or at the least points me in the correct direction! It is like having another employee that is extremely experienced.
Jim Murphy
Programmer at Smart IT Solutions
When asked, what has been your best career decision?
Deciding to stick with EE.
Mohamed Asif
Technical Department Head
Being involved with EE helped me to grow personally and professionally.
Carl Webster
CTP, Sr Infrastructure Consultant
Ask ANY Question
Connect with Certified Experts to gain insight and support on specific technology challenges including:
Troubleshooting
Research
Professional Opinions
Ask a QuestionDid You Know?
We've partnered with two important charities to provide clean water and computer science education to those who need it most. READ MORE
troubleshooting Question
Cisco Aironet 1100 with WPA and Guest Access
Hi,
Currently we have two Cisco Aironets (AP1121G) using WEP for our default network with only one SSID. What I would like to do would be to have one SSID for our staff which uses WPA, a Guest SSID on a separate VLAN which also uses WPA and a third SSID on a separate VLAN with WEP for legacy devices. We currently don't have any RADIUS server configured and both wireless devices are connected using Cisco 3750 switches.
Ideally each SSID would correspond to a different subnet, we currently only have one DHCP server, is this possible? looked at the idea of using IP helper address before to broadcast across different subnets.
Can someone advise please.
Thanks,
PP
Currently we have two Cisco Aironets (AP1121G) using WEP for our default network with only one SSID. What I would like to do would be to have one SSID for our staff which uses WPA, a Guest SSID on a separate VLAN which also uses WPA and a third SSID on a separate VLAN with WEP for legacy devices. We currently don't have any RADIUS server configured and both wireless devices are connected using Cisco 3750 switches.
Ideally each SSID would correspond to a different subnet, we currently only have one DHCP server, is this possible? looked at the idea of using IP helper address before to broadcast across different subnets.
Can someone advise please.
Thanks,
PP
Our community of experts have been thoroughly vetted for their expertise and industry experience.