Link to home
Start Free TrialLog in
Avatar of jacksch4820
jacksch4820

asked on

Enable HTTP on CISCO 1841 Router for SDM

Hi
I enabled http on router but when using SDM get error message see attachment
I can ping router and ip http server is enabled on router
Avatar of mawueli
mawueli
Flag of Switzerland image

sorry, dont see any attachment with the error message.
Can you give some more details?
Avatar of Istvan Kalmar
Please show the whole config

you need the following:

SDM files on flash

ip http server
ip http authentication local
and privilege 15 user

username cisco privilege 15 sec cisco
Hi

send full configuration, remove passwords and keys,, plus send the error you got ??
Avatar of jacksch4820
jacksch4820

ASKER

HI
I try to use SDM on my computer please see attachment for error + router config

version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5 $1$03di$b7n0ulEOmrH5zJ3WG64eU0
!
no aaa new-model
ip cef
!
!
!
!
interface FastEthernet0/0
 description LAN
 ip address 192.168.0.1 255.255.255.0
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0
 no ip address
 shutdown
 clock rate 2000000
!
ip forward-protocol nd
!
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
!
!
control-plane

Open in new window

error.JPG
ASKER CERTIFIED SOLUTION
Avatar of memo_tnt
memo_tnt
Flag of Palestine, State of image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
thanx memo
problem solved