Avatar of jr-its
jr-its
 asked on

ProCurve 5406 and Avaya IP Phones QOS

Hi all,

i have to configure our ProCurve 5406zl Switches for a new Alcatel-Lucent IP Phone Solution. Im not sure how to setup the QOS- Settings on the ProCurves.
I created a new VLAN (50) for the IP Phones and the PBX.
The Technician who will install the PBX said that he needs TOS 5 and DiffServ 46...
Can anyone help me how to configure the ProCurves for this ? Thanks !
My current setup is:

vlan 50
   name "VOIP_NET"
   untagged A18-A20
   qos priority 7
   tagged Trk1-Trk3
   voice
   ip address 192.168.50.1 255.255.255.0
Switches / HubsNetworking Hardware-OtherNetworking

Avatar of undefined
Last Comment
icsctech

8/22/2022 - Mon
ASKER CERTIFIED SOLUTION
jburgaard

Log in or sign up to see answer
Become an EE member today7-DAY FREE TRIAL
Members can start a 7-Day Free trial then enjoy unlimited access to the platform
Sign up - Free for 7 days
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.
Not exactly the question you had in mind?
Sign up for an EE membership and get your own personalized solution. With an EE membership, you can ask unlimited troubleshooting, research, or opinion questions.
ask a question
icsctech

I want to setup a new procurve switch for Qos. I will only have abaya phone system and avaya phones connected to it via Poe
Where do I start?
Your help has saved me hundreds of hours of internet surfing.
fblack61