How to connect to web interface on Linksys RTP300 Router
I just got a 2nd hand Linksys RTP300 Router. I connected it to my Belkin router, and looked at its DHCP client list. The RTP300 shows up with its MAC address and a dynamic IP address 192.168.2.27. I go to that address with my browser and no response - eventually times out.
What am I missing?
What am I missing?
because your network is 192.168.2.x it'd be quicker to plug your PC directly into the RTP300 and get a DHCP address from it first then configure it directly before plugging it back into your main network.
ASKER
Yes I have learned a lot since posting the question. I now have access to the web interface. The problem now is trying to upgrade the firmware. There is no tab for that under administration, and attempts to login at 0.0.0.0/upgrade.html (Please enter the password provided by service provider):are rejected "Error: User not allowed to login this user level."
ASKER
I tried the cyt tool. The XML update never completes.
My goal is to register the 2 phone ports with an Asterisk server.
My goal is to register the 2 phone ports with an Asterisk server.
ASKER
It is now also clear that this device "belongs" to Vonage. So I need to unlock it. The unlock links I've followed all lead to one or another roadblock. I did reset the device by holding the reset button in until I got a response.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
It is not worth any more of my time. I have ordered some unlocked PAP2s that should serve me OK. Thanks for the effort.
To reset RTP300 press and hold the reset button for 15-20 seconds (at least).
the default username is admin and the default password is admin
the default IP address is 192.168.15.1 when reset to factory default..