Cisco 1760 Router Built in Nic does not work.

Cisco 1760 Router Built in Nic does not work.
I had the internal inc working before ethernet port

It was working before I did a factory restore and now it won't light help.

Do I need to configure it? if so how?
sobeservices2Asked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

RunningGagCommented:
Are you saying that you wiped the configuration?  If so, yes you must reconfigure all interfaces.

The minimal commands for bringing an interface up for use are:

Router# enable
Router(config)#interface INTERFACE_NAME (eth0)
Router(config-if)# ip address IP_ADDRESS SUBNET_MASK (10.0.0.1 255.0.0.0)
Routerconfig-if)# no shutdown

Key: command VARIABLE (example)

Might I suggest these sites as a resource?

http://pages.swcp.com/~jgentry/topo/cisco.htm
http://www.cisco.com/en/US/docs/ios/12_2/interface/configuration/guide/finter_c.html
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
sobeservices2Author Commented:
OK the first link is what I was using to get started. Looks like I figured it out this time now I have.

router#show running-config
Building configuration...

Current configuration : 612 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname router
!
boot-start-marker
boot-end-marker
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
!
!
!
!
no ftp-server write-enable
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface FastEthernet0/0
 ip address 192.168.10.1 255.255.255.0
 speed auto
!
interface Serial0/0
 ip address 192.168.1.1 255.255.255.0
!
ip classless
no ip http server
!
!
!
control-plane
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
!
end

router#

Shouldn't I be able to ping the router's ip from a computer on my network 192.168.10.1
0
RunningGagCommented:
Well, you don't have any routing set up so unless you're directly connected (or through a switch), and the computer has a static IP address, no.
0
KuppingerCole Reviews AlgoSec in Executive Report

Leading analyst firm, KuppingerCole reviews AlgoSec's Security Policy Management Solution, and the security challenges faced by companies today in their Executive View report.

RunningGagCommented:
The problem is that when you wipe a Cisco router, its wiped.  It isn't like a Linksys router where it comes pre-configured.  You have to set everything up: interfaces, routing, dhcp, etc.  

Do you have a backup copy of your previous configs that you could copy back onto the router?
0
sobeservices2Author Commented:
Sorry I figure my issue out here.

My computer is on a 192.168.1.50 and I was trying to ping a 192.168.10.1
I changed the router to a 192.168.1.241 address now
0
sobeservices2Author Commented:
Don't need backup of previous config's because it wasn't originally mine. I was given it.

Anyway I can get that hard to get Cisco software
0
sobeservices2Author Commented:
Does this have a web interface now that I assigned it an ip?
0
RunningGagCommented:
No. you'll have to enable it.

Router(config)#ip http server
0
RunningGagCommented:
Cisco IOS Configuration Fundamentals and Network Management Command Reference, Release 12.3

http://www9.cisco.com/en/US/docs/ios/12_3/configfun/command/reference/fun_r.html
0
sobeservices2Author Commented:
Cool I got that far.. Nice
I went to the ip 192.168.1.241 got to the web interface

Click on Configure and monitor QoS through the web interface.
And it didn't work is there something else I should do

I only have a wic 1t serial card in there..

Thinking about getting some more so I can take my two internet providers DSL and cable and the add some other cards for the VOIP gateway
0
RunningGagCommented:
QoS is way down the road for configuration.  

If you are interested in configuring a router for production use, at the very least, I would seriously suggest taking a look at the CCNA certification material.
0
sobeservices2Author Commented:
What exactly is QoS. I heard the voip guy talk about it a few times when he was showing me the VOIP install and my gf's dad's business.
0
sobeservices2Author Commented:
Any recommendations on a good CCNA book to get?
0
RunningGagCommented:
Quality of Service (QoS)

http://en.wikipedia.org/wiki/Quality_of_service
http://www.cisco.com/en/US/docs/internetworking/technology/handbook/QoS.html


As for training material:

I used the online curriculum as part of classroom instruction.  I found the CBT Nuggets videos quite helpful as a supplement to the actual curriculum.  I know several of my classmates that used the Cisco official books.

http://www.ciscopress.com/bookstore/product.asp?isbn=1587201828
0
sobeservices2Author Commented:
Thanks
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.