• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 574
  • Last Modified:

Cisco PIX 506E VPN RADIUS SETUP Migration from Windows 2003 to 2008

We have a Cisco PIX 506E VPN RADIUS SETUP which we migrated from Windows 2003 to Windows 2008 server.  Is there anything we need to change in the PIX other than our DNS servers changes?  Active Directory was imported and everything works internally except our VPN, authentication failure.  It worked perfectly on Windows 2003.  Any suggestions would be greatly appreciated.   Thanks.
0
tech-
Asked:
tech-
  • 2
1 Solution
 
merowingerCommented:
I assume you using the Network Policy Server (NPS) on your Server 2008?
Have you followed the NPS Wizard which is located on the top of the NPS mmc console tree to configure your VPN rules and Radius Clients...?
0
 
tech-Author Commented:
We have setup the PIX in NPS and it is not allowing users to authenticate...
0
 
merowingerCommented:
Whcih settings did you in detail?
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now