cisco 3640 can't apply policy map to multilink int

hi, i am trying to apply policy map to Multilink interface on 3640, it lets me type in command, even looks lke its taking it, then freezes a bit, then comes back and it didn't take the command, here is what i am trying to do:

int multilink1
service-policy output VOICE_VIDEO

when router unfreezes in about 5 sec, command isn't there.


Configuration register is 0x2102
flash:c3640-i-mz.122-32.bin"
      do 3640 support this ? if so, what ios is needed ?

r#show ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-I-M), Version 12.2(32), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 02-Dec-05 15:20 by
Image text-base: 0x60008930, data-base: 0x60A3E000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

bo-mpls-rtr uptime is 48 weeks, 4 days, 3 hours, 24 minutes
System returned to ROM by power-on
System restarted at 15:03:43 MST Sat Apr 25 2009
System image file is "flash:c3640-i-mz.122-32.bin"

cisco 3640 (R4700) processor (revision 0x00) with 124928K/6144K bytes of memory.
Processor board ID 15145161
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
5 Serial network interface(s)
5 Channelized T1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102
vneymanAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

mikebernhardtCommented:
Please post the config you have, and what you're trying to add to it-- in other words, what is the policy you're trying to apply?
0
vneymanAuthor Commented:
ios was the issue 12.4 worked.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.