office outlook webaccess extranet timeout

I am accessing the outllok email from web access

It times out very quickly when idle

Is there  a way to cofigure the uptime longer

Thanks
Greens8301Asked:
Who is Participating?

[Webinar] Streamline your web hosting managementRegister Today

x
 
fbcbloodcenterConnect With a Mentor Commented:
Idle Timeout in OWA
By philipflint
When you connect to OWA, it will disconnect you (log you out) if you don’t use the interface for a period. This can be annoying as the timeout periods are quite low.
 
This can quite easily be fixed by running the commands below.
 
set-ItemProperty ‘HKLM:\SYSTEM\CurrentControlSet\Services\MSExchange OWA’ -name PublicTimeout -value <amount of time> -type dword
 
The above sets the timout (in minutes) if you logon from a public computer. The below command has a similar effect of you logon stating that you are on a private computer.
 
set-ItemProperty ‘HKLM:\SYSTEM\CurrentControlSet\Services\MSExchange OWA’ -name PrivateTimeout -value <amount of time> -type dword
 
Bear in mind that, if OWA is published through ISA, ISA can also set this time out limit for connections through ISA.
0
 
Greens8301Author Commented:
I can get here
HKLM:\SYSTEM\CurrentControlSet\Services

MSExchange OWA is not listed under this path

Any ideas

Thank

0
 
fbcbloodcenterCommented:
on the SERVER
0
All Courses

From novice to tech pro — start learning today.