Is this Cisco 881w router setup possible?

Hello,

I currently have numerous 881w routers configured for users to take home along with a company Laptop as a VPN solution. However, now I have been instructed to make three of the switchports on each router to have direct access to the internet while the VPN connection is active. Is this possible? If it is, may I have a sample configuration on how this can be done? Thanks.
LVL 5
FunkyBrownAsked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

DonbooCommented:
Yes it is.

Simplified:

You make another VLAN for the 3 ports.
You make a ACL for the new VLAN denying inbound traffic on that VLAN to IPs behind the VPN tunnel just to be safe.
You make NAT fo the new VLAN.

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
FunkyBrownAuthor Commented:
Ok. I have created the new Vlan, and assigned it to the three ports. I created the Vlan and assigned it an IP address in a new subnet, and created a new DHCP pool. However when I plug a machine into one of those ports, it will not assign the machine an IP address. I will post the relevant configuration.

ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.19
ip dhcp excluded-address 192.168.0.31 192.168.0.254
ip dhcp excluded-address 172.16.255.1 172.16.255.2
!
ip dhcp pool LOCAL
   import all
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
!
ip dhcp pool private
   import all
   network 172.16.255.0 255.255.255.0
   default-router 172.16.255.0 255.255.255.0
!
interface FastEthernet0
!
interface FastEthernet1
 switchport access vlan 5
!
interface FastEthernet2
 switchport access vlan 5
!
interface FastEthernet3
 switchport access vlan 5
!
interface FastEthernet4
 ip address dhcp
 ip virtual-reassembly
 duplex auto
 speed auto
 crypto ipsec client ezvpn SK_BLUE_CROSS
!
interface Vlan1
 ip address 192.168.0.1 255.255.255.0
 ip nat inside
 ip nat enable
 ip virtual-reassembly
 crypto ipsec client ezvpn
!
interface Vlan5
 ip address 172.16.255.1 255.255.255.0
FunkyBrownAuthor Commented:
Found one problem. In the Private DHCP pool, the default-router is incorrect.
FunkyBrownAuthor Commented:
I guess that is the only problem I will have with it. Thanks for the tips.
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.