• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 251
  • Last Modified:

working with two nics

I have a windows 7 PC with two network cards, one connect to LAN1. LAN1 is very protected with a proxy server, URL filtering and blocks everting beside http/https.
The second network card is connect to LAN2 - ADSL with minimum protection.
I want to use remote desktop connection and connect to my terminal server, located on the second network. (with or without VPN)
0
baruch71
Asked:
baruch71
1 Solution
 
JohnLoCommented:
This might need a liitle more to the question....  
My answer would be right now disconnect lan1
0
 
shbobjCommented:
If you know the ip address of the terminal server, add a route entry to make all the traffic destined to the server to pass through the lan2 interface.

command example: route ADD 157.0.0.0 MASK 255.0.0.0  157.55.80.1 IF 2
0
 
pwindellCommented:
There is no static route to add.

The PC is on both networks at the same time (in spite of that being a horrible idea),...so there is no route to create.

Open Remote Desktop Connection,...identify the TS box using the IP# (naming is probably failing due to the duel nics),...then just tell it to connect.

0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now