brookejp
asked on
CAS ARRAY USING NLB UNDER 2008r2 SERVER AND 2010 EXCHANGE
No external connections or data passing through NLB
I got the system up and running, but for the life of me i cannot get NLB to work from outside the domain....
Setup
SRV 1 - RUNNING NLB,CAS,HUB & has 2 NIC
nic1 domain
static ip 192.168.1.6
sub 255.255.255.0
GATEWAY 192.168.1.1
dns 192.168.1.2 & 192.168.1.3
nic2 NLB
staticip 192.168.1.8
sub 255.255.255.0
GATEWAY
dns 192.168.1.2 & 192.168.1.3
SRV 2 - RUNNING NLB,CAS,HUB & has 2 NIC
nic1 domain
static ip 192.168.1.7
sub 255.255.255.0
GATEWAY 192.168.1.1
dns 192.168.1.2 & 192.168.1.3
nic2 nlb
staticip 192.168.1.9
sub 255.255.255.0
GATEWAY
dns 192.168.1.2 & 192.168.1.3
NLB setup
virtual IP address for CAS 192.168.1.11 fqrn name EXCCASSRV.Domain.net created in DNS
host 1 NIC2 NLB on SRV1 ip 192.168.1.8
host 2 NIC2 NLB on SRV2 IP 192.168.1.9
SETUP USING UNICAST
ROUTER 192.168.1.1 (GATEWAY) -> NETGEAR DGN1000 ADSL2+ ROUTER
CAS PORTS 80, 110, ETC FORWARDED TO 192.169.1.11 (EXCCASSRV.Domain.net)
EXCHANGE SMTP, OWA ETC HAS BEEN HAS BEEN SETUP TO LISTEN ON ALL IP ON SERVER...
MAILBOX HAS BEEN SETUP TO POINT TO CREATED CAS ARRAY
I got the system up and running, but for the life of me i cannot get NLB to work from outside the domain....
Setup
SRV 1 - RUNNING NLB,CAS,HUB & has 2 NIC
nic1 domain
static ip 192.168.1.6
sub 255.255.255.0
GATEWAY 192.168.1.1
dns 192.168.1.2 & 192.168.1.3
nic2 NLB
staticip 192.168.1.8
sub 255.255.255.0
GATEWAY
dns 192.168.1.2 & 192.168.1.3
SRV 2 - RUNNING NLB,CAS,HUB & has 2 NIC
nic1 domain
static ip 192.168.1.7
sub 255.255.255.0
GATEWAY 192.168.1.1
dns 192.168.1.2 & 192.168.1.3
nic2 nlb
staticip 192.168.1.9
sub 255.255.255.0
GATEWAY
dns 192.168.1.2 & 192.168.1.3
NLB setup
virtual IP address for CAS 192.168.1.11 fqrn name EXCCASSRV.Domain.net created in DNS
host 1 NIC2 NLB on SRV1 ip 192.168.1.8
host 2 NIC2 NLB on SRV2 IP 192.168.1.9
SETUP USING UNICAST
ROUTER 192.168.1.1 (GATEWAY) -> NETGEAR DGN1000 ADSL2+ ROUTER
CAS PORTS 80, 110, ETC FORWARDED TO 192.169.1.11 (EXCCASSRV.Domain.net)
EXCHANGE SMTP, OWA ETC HAS BEEN HAS BEEN SETUP TO LISTEN ON ALL IP ON SERVER...
MAILBOX HAS BEEN SETUP TO POINT TO CREATED CAS ARRAY
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I will give the link a try, I did follow another step guide as that guide used 2 nic cards, It looks like this method only uses one, so does it matter to have 2 nic or will NLB run very happily useing 1 card in each host. Also if you use 1 nic do you use unicast or milticast.. Thanks
ASKER
Name Site Fqdn Members
---- ---- ---- -------
Ukdatanet CAS Ar... Default-First-Sit... BRPRVNW07.UKDatanet.net {BRPRVNW05, BRPRVNW06}
Help I cannot delete the old CAR that was set up, I have used the remove-ClientAccessArray but it asks fot the Identity. But as you can see it shortens the name down and i cannot fully remember what it was I prieviously entered,Is there any way i can get to find the complete name that was used,.
Thanks
ASKER
Just decided to reformat the servers and start from scratch...
Please provide output: Get-ClientAccessArray | fl