Link to home
Start Free TrialLog in
Avatar of kieran2008
kieran2008

asked on

Is it possible to set up two BOVPNs on a Firebox X20e?

I aready have a BOVPN between a Firebox X700 and the X20e but I also need to set up a BOVPN between a Firebox X750e and the same X20e.
ASKER CERTIFIED SOLUTION
Avatar of dpk_wal
dpk_wal
Flag of India image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of kieran2008
kieran2008

ASKER

I presently have an X700 (192.168.0.1) with a BOVPN to and X20e (192.168.10.1) in Beijing.
I need to replace the X700 with an X750e. There is no migration path for this and all services need to be created from scratch. I had hoped to create a second BOVPN from the X750e (192.168.0.2) to the X20e and ensure it is working before bringing the X700 offline, but apparantly I cannot have two BOVPNs to the same subnet.
I am assuming that x750e has different public IP.
On FBx750e you can configure NAT over IPSec, so x20 would think it is another subnet.

Please have a look at link below:
http://watchguard.custhelp.com/app/answers/detail/a_id/2016/kw/NAT%20over%20IPSec/session/L3NpZC84bFA0b2paag%3D%3D

Please note depending on your version of WG software; the steps might differ a bit,

Please implement and update.

Thank you.
Thanks for your help
You are welcome; so is the problem resolved.

Thank you.
none
none