Advizor
asked on
Tons of Event ID 1090 in eventlog on terminal server.
Hi
A costumers Windows Server 2008 R2 Terminal server, is getting alot of Event ID 1090:
Windows failed to record Resultant Set of Policy (RSoP) information, which describes the scope of Group Policy objects applied to the computer or user. This could be caused by Windows Management Instrumentation (WMI) service being disabled, stopped, or other WMI errors. Group Policy settings successfully applied to the computer or user; however, management tools may not report accurately.
And there is some issues with Roming Profiles, probably because of failing GPO.
The microsoft site: http://technet.microsoft.com/en-us/library/dd392575(WS.10).aspx tells me to:
1.Ensure the Windows Management Instrumentation (WMI) service is enabled and configured for automatic startup.
2.Ensure the path, %Systemroot%\System32\Wbem
3.Use the WMIDiag utility to diagnose the problem further (http://go.microsoft.com/fwlink/?LinkId=92714).
1 and 2, are as they should at the WMIDiag does not work with 2008 R2.
Can someone help, with how I can troubleshoot this issue or maybe help with it :)
/Advizor
A costumers Windows Server 2008 R2 Terminal server, is getting alot of Event ID 1090:
Windows failed to record Resultant Set of Policy (RSoP) information, which describes the scope of Group Policy objects applied to the computer or user. This could be caused by Windows Management Instrumentation (WMI) service being disabled, stopped, or other WMI errors. Group Policy settings successfully applied to the computer or user; however, management tools may not report accurately.
And there is some issues with Roming Profiles, probably because of failing GPO.
The microsoft site: http://technet.microsoft.com/en-us/library/dd392575(WS.10).aspx tells me to:
1.Ensure the Windows Management Instrumentation (WMI) service is enabled and configured for automatic startup.
2.Ensure the path, %Systemroot%\System32\Wbem
3.Use the WMIDiag utility to diagnose the problem further (http://go.microsoft.com/fwlink/?LinkId=92714).
1 and 2, are as they should at the WMIDiag does not work with 2008 R2.
Can someone help, with how I can troubleshoot this issue or maybe help with it :)
/Advizor
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ok please use "Request attention" button on right so that others can look into this problem
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Gpupdate:
Updating Policy...
User Policy update has completed successfully.
The following warnings were encountered during user policy processing:
Windows failed to record Resultant Set of Policy (RSoP) information, which descr
ibes the scope of Group Policy objects applied to the computer or user. This cou
ld be caused by Windows Management Instrumentation (WMI) service being disabled,
stopped, or other WMI errors. Group Policy settings successfully applied to the
computer or user; however, management tools may not report accurately.
The Group Policy Client Side Extension Folder Redirection was unable to apply on
e or more settings because the changes must be processed before system startup o
r user logon. The system will wait for Group Policy processing to finish complet
ely before the next startup or logon for this user, and this may result in slow
startup and boot performance.
Computer Policy update has completed successfully.
For more detailed information, review the event log or run GPRESULT /H GPReport.
html from the command line to access information about Group Policy results.
Certain User policies are enabled that can only run during logon.
OK to logoff?. (Y/N)
For the WMI Control please see attached.
I will se if I can get a window to try the solution acl-puzz suggested.
WMI-Control.jpg
Updating Policy...
User Policy update has completed successfully.
The following warnings were encountered during user policy processing:
Windows failed to record Resultant Set of Policy (RSoP) information, which descr
ibes the scope of Group Policy objects applied to the computer or user. This cou
ld be caused by Windows Management Instrumentation (WMI) service being disabled,
stopped, or other WMI errors. Group Policy settings successfully applied to the
computer or user; however, management tools may not report accurately.
The Group Policy Client Side Extension Folder Redirection was unable to apply on
e or more settings because the changes must be processed before system startup o
r user logon. The system will wait for Group Policy processing to finish complet
ely before the next startup or logon for this user, and this may result in slow
startup and boot performance.
Computer Policy update has completed successfully.
For more detailed information, review the event log or run GPRESULT /H GPReport.
html from the command line to access information about Group Policy results.
Certain User policies are enabled that can only run during logon.
OK to logoff?. (Y/N)
For the WMI Control please see attached.
I will se if I can get a window to try the solution acl-puzz suggested.
WMI-Control.jpg
ASKER
The problem has not been solved, the server is about to get phased out, so we let i be.
Thank you all
Thank you all
ASKER
Have seen that but they are talking about Windows XP, and his post has been marked as answered but the system, so I don't know if it helps.
And it requires reboot, which I can't just do, as it's an terminal server.