Elemental12
asked on
Cisco 3000 VPN Concentrator password issues
Hi,
I have an old Cisco 3005 VPN concentrator that I am trying to reconfigure. After upgrading it to vpn3005-4.7.2.P-k9.bin, which is the last version, I logged in and change the IP addresses on the public and private interfaces. In order to continue, I change the URL in the browser to the new IP. Once I do that, I cannot login. The page comes up asking for user name and password and typing in the password that I used before the IP change was made does not work. Any ideas/suggestions ?
Thanks
I have an old Cisco 3005 VPN concentrator that I am trying to reconfigure. After upgrading it to vpn3005-4.7.2.P-k9.bin, which is the last version, I logged in and change the IP addresses on the public and private interfaces. In order to continue, I change the URL in the browser to the new IP. Once I do that, I cannot login. The page comes up asking for user name and password and typing in the password that I used before the IP change was made does not work. Any ideas/suggestions ?
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
While it seems that your answer may be right, we decided to just scrap the box and start from scratch, so I never really got to test this solution.
Thanks
Thanks
ASKER
What I don't get is that the password works before I change the IP address. Once I change the IP address, the password no longer works. If I reboot the device (which sets it back to the original config because I have not saved to memory yet), the old password works again.
I am interested by your first idea. I am not in the office today but will try it first thing Monday morning. If you have any other ideas, please feel free to send them along and I can bang through them Monday morning and let you know which worked and which did not.
Thanks