cisco 1800 cli command

What is the command to add the following line to my router configuration...

" permit tcp any host xxx.xxx.xxx.xxx eq 443"  ie i want to open https to my mail sever

and what command do I use to remove such a line.

Thanks
LVL 1
taphopeAsked:
Who is Participating?
 
1oo4Commented:
To find out what is the ACL_NAME you need run
show access-lists command
0
 
1oo4Commented:
enable
configure terminal
ip access-list extended <ACL_NAME>
permit tcp any host xxx.xxx.xxx.xxx eq 443
0
 
Istvan KalmarHead of IT Security Division Commented:
Hi,

Did you configured static nat for 443 port?
0
 
1oo4Commented:
Step by step:
1)
>enable
2)
#show access-lists
Have a look at existing rules
If the output is complicated and you are confused then post the output here
It will begin like that
Standard IP access list 1
    10 permit 192.168.19.0, wildcard bits 0.0.0.255
.....

3)
#configure terminal
4)
#ip access-list standard 1
5)
#1 permit tcp any host xxx.xxx.xxx.xxx eq 443
6)Ctrl+Z
7)wr mem    -  Save configuration

0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.