Dell 1950 2GB RAM, 2- 250GB SATA Hard drives RAID (Mirror) Dual Pwr Supplies, Single Processor. Motherboard crashed - Dell replaced it with same model (but different Rev.)
Machine now boots to login screen for about 15 Seconds and then gets Blue Screen with the following codes.
stop: 0x0000009c (0x00000005, 0x808977a0, 0xb2000010, 0x84200e0f) -
Years ago when I had to change a motherboard Microsoft had a KB article that described a number of drivers that had to be copied to the System so that on the boot to the new motherboard the OS would find and change to the drivers it needed for the new hardware.
Does anyone have a definition of the 5 stop codes above?
Does anyone have the link to that Microsoft KB that explains how and which drivers to add to the new system?
Does anyone have a better solution than listed above?
This is the Finance server for the company I work for and although it is backed up. *I would prefer not having to reinstall all the accounting, ADP, Timeclock, etc Software if their is another way.
I am really under the gun to get this fixed Immed so any thoughts would be appreciated.