Brain2000
asked on
Cisco SA-VAM not supported in 7200 series 12.4(24)T
We have a Cisco 7206 NPE-225 with a SA-VAM card. This card worked great under IOS version 12.4(24c), but after updating to 12.4(24)T the card is now shown as unknown. Below is the "show diag". Cisco's site shows that this card is supported in this version. The bootstrap version is 12.3(26).
We moved from the 12.4(24c) version because OER was broken. In the new version 12.4(24)T VAM is broken. Anyone have any recommendations on their experience in tracking down a solid IOS version?
Slot 3:
Unknown (type 650) Port adapter
Port adapter is disabled deactivated powered off
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
PCB Serial Number : 27361041
Part Number : 73-5953-05
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0-0
Product (FRU) Number : SA-VAM
Top Assy. Part Number : 800-10496-05
CLEI Code : CN9ISV0AAA
EEPROM format version 4
EEPROM contents (hex):
We moved from the 12.4(24c) version because OER was broken. In the new version 12.4(24)T VAM is broken. Anyone have any recommendations on their experience in tracking down a solid IOS version?
Slot 3:
Unknown (type 650) Port adapter
Port adapter is disabled deactivated powered off
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
PCB Serial Number : 27361041
Part Number : 73-5953-05
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 0-0
Product (FRU) Number : SA-VAM
Top Assy. Part Number : 800-10496-05
CLEI Code : CN9ISV0AAA
EEPROM format version 4
EEPROM contents (hex):
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.