<div>
&quot;can both servers provide a full 100mb connection to their workstations simultaneously?&quot;<br />
<br />
&nbsp;Yes.<br />
<a href="http://www.procurve.com/products/switches/switch2524-2512/overview.htm#J4813A" rel="ugc">http://www.procurve.com/products/switches/switch2524-2512/overview.htm#J4813A</a><br />

</div>


"can both servers provide a full 100mb connection to their workstations simultaneously?"

 Yes.
http://www.procurve.com/products/switches/switch2524-2512/overview.htm#J4813A [http://www.procurve.com/products/switches/switch2524-2512/overview.htm#J4813A]


<div>
<div class="content wysiwyg-content">
I have a few HP 2524's running two separate subnet's, as far as switch performance, can both VLAN's process at 100mb separate of each other?<br />
<br />
For example, I have ports 1-5 setup for vlan 0. &nbsp;Server A connects via port 1 and serves four workstations via 2-5. &nbsp;In theory those four workstations would have 100mb connection to the server, if they were all maxed out they would each get 25% of the traffic.<br />
<br />
Next I have ports 11-15 on vlan 100. &nbsp;Server B connects via port 11 and serves four workstations via 12-15. &nbsp;Again, in theory those four workstations would have a 100mb connection to the server - can both servers provide a full 100mb connection to their workstations simultaneously?<br />
<br />
Hopefully that makes sense.
</div>
</div>


I have a few HP 2524's running two separate subnet's, as far as switch performance, can both VLAN's process at 100mb separate of each other?

For example, I have ports 1-5 setup for vlan 0.  Server A connects via port 1 and serves four workstations via 2-5.  In theory those four workstations would have 100mb connection to the server, if they were all maxed out they would each get 25% of the traffic.

Next I have ports 11-15 on vlan 100.  Server B connects via port 11 and serves four workstations via 12-15.  Again, in theory those four workstations would have a 100mb connection to the server - can both servers provide a full 100mb connection to their workstations simultaneously?

Hopefully that makes sense.

HP 2524 - seperate VLANs, can both support 100MB simultaneously?

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Network design and methodology, also known as network architecture, is the design of a communication network. It is a framework for the specification of a network's physical components and their functional organization and configuration, its operational principles and procedures, as well as data formats used in its operation. In telecommunication, the specification of a network architecture may also include a detailed description of products and services delivered via a communications network, as well as detailed rate and billing structures under which services are compensated.