Determine IOS version

I'm trying to download IOS software for my router - but nothing seems to match on Cisco's site. (I am registered etc). I want to download the IOS to create a lab environment to make network changes virtually first.

I know cisco's site is a pain but I can't believe my IOS isn't listed.

Here is my show ver:


Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JK9O3S-M), Version 12.2(26), RELEASE SOFTWARE (fc2                              )
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 31-Jul-04 01:26 by eaarmas
Image text-base: 0x60008940, data-base: 0x617CE000

ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT S                              OFTWARE
BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(14)S2, EARLY DEPLOYMENT RELE                              ASE SOFTWARE (fc1)

PRL-CORE-7206VXR uptime is 8 weeks, 13 hours, 18 minutes
System returned to ROM by power-on
System restarted at 00:10:17 EDT Wed Feb 17 2010
System image file is "slot0:c7200-jk9o3s-mz.122-26.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco 7206VXR (NPE300) processor (revision D) with 229376K/65536K bytes of memory.
Processor board ID 16067080
R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.6

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.

PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has an aggregate of 600 bandwidth points.
Total of 290 bandwidth points have been used on PCI bus mbo_mb1.
PA's ( ) has/have over subscribed 0 bandwidth points in single port configuration on PCI bus mbo_mb1.
PCI bus mb2 (Slots 2, 4, 6) has an aggregate of 600 bandwidth points.
Total of 40 bandwidth points have been used on PCI bus mb2.
PA's ( ) has/have over subscribed 0 bandwidth points in single port configuration on PCI bus mb2.
Please refer to the following document "Cisco 7200 Series Port Adaptor Hardware Configuration Guidelines" on CCO <www.cisco.com>, for c7200 bandwidth points oversubscription/usage guidelines.

4 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
27 Serial network interface(s)
1 Channelized T3 port(s)
125K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102