maznabili
asked on
InterVLAN routing using HP Procurve 3500yl..
Hello all,
I am unable to get Procurve 3500yl switch to route between vlans..
I'm a Cisco guy and I'm looking for equivalent to Cisco's SVI..
Your help is highly appreciated..
Please, check the picture attached in order to better understand what I need..
Thanks in advance
Drawing1.jpg
I am unable to get Procurve 3500yl switch to route between vlans..
I'm a Cisco guy and I'm looking for equivalent to Cisco's SVI..
Your help is highly appreciated..
Please, check the picture attached in order to better understand what I need..
Thanks in advance
Drawing1.jpg
Can you post the current config?
The Procurve's IOS is similar to the Cisco IOS. Both have SVI's.
The Procurve's IOS is similar to the Cisco IOS. Both have SVI's.
ASKER
Well, I have "IP Routing" enabled but, I noticed that the IOS that's shipped with the swtich is very old, v. 12.xx dated April 2006.. I'll upgrade it to the current version of IOS which is v.14.47 and see what happens next..
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Did you enabled IP routing on 3500yl?