Drivers for emachine T4010 network card

I am looking for the Drivers for emachine T4010 network card. I am running windows xp sp2.
I have gone on the with site but the drivers the give do not work.
Thank you.
jodyreidIT ManagerAsked:
Who is Participating?
TimTheTechConnect With a Mentor Commented:
Your emachines uses the Intel® PRO 10/100 Mbps built-in Ethernet.

Try to identify the specific adapter within device manager and then check for the drivers in the list below:

Windows XP*

   1. Click Start
   2. Right-click My Computer
   3. Select Properties
   4. Click Hardware tab
   5. Click Device Manager button
   6. Expand Network adapters section, right-click on the Intel Network Adapter
   7. Select Properties
   8. Click Details tab
   9. Select Device Instance Id from the pull down
  10. Match the PCI\VEN and DEV IDs
      (i.e. PCI\VEN_8086&DEV_10F1&xxxxxxxxx) to those listed in the "Additional Information" column in table below

If that one does not work you can try one of the following:

If none of these work throw your computer out a window.
That link didn't post correctly so you will have to copy and past it Series&Step3=T4010&OS=X01&LC=en&BC=eMachines&SC=PA_6E
jodyreidIT ManagerAuthor Commented:
This did not work.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.