Nortel BSR 222 password recovey

Does any one know the password recovery options for nortel BSR 222 .I  am having an online device for which i forgot the password.

jkm
josekm1980Asked:
Who is Participating?
 
Istvan KalmarHead of IT Security Division Commented:
Diskless VPN Routers (1010, 1050, 1100)
1. Restart the router and push the button (pinhole) marked REC on the back panel during the memory test. Note it is not necessary to hold it. This will put the router into Recovery mode.
2. Once the startup is complete, open a web browser and direct it to the management IP address to open the GUI.
3. Once there, select the radio button marked Restore original factory settings and click on the Restore button.
4. When the message “Successful Factory Restore” appears at the top of the screen perform a restart. It is now at Factory Default. The administrator userid will be returned to admin, with the password returned to setup. As the management IP address is no longer present, the console must be used to enter both the management and private interface IP addresses.
0
 
Istvan KalmarHead of IT Security Division Commented:
Diskless VPN Routers (1010, 1050, 1100)
1. Restart the router and push the button (pinhole) marked REC on the back panel during the memory test. Note it is not necessary to hold it. This will put the router into Recovery mode.
2. Once the startup is complete, open a web browser and direct it to the management IP address to open the GUI.
3. Once there, select the radio button marked Restore original factory settings and click on the Restore button.
4. When the message “Successful Factory Restore” appears at the top of the screen perform a restart. It is now at Factory Default. The administrator userid will be returned to admin, with the password returned to setup. As the management IP address is no longer present, the console must be used to enter both the management and private interface IP addresses.
0
 
josekm1980Author Commented:
Will this destroy he current configuration of  the Device ?  My device is online and i can't  risk losing the current configurations as my remote users are accessing their applications through this device .




0
 
Istvan KalmarHead of IT Security Division Commented:
If you do it it goes factory defaultc config....
0
 
QlemoBatchelor, Developer and EE Topic AdvisorCommented:
This question has been classified as abandoned and is being closed as part of the Cleanup Program.  See my comment at the end of the question for more details.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.