Cisco 4900M management port

hi,
I ve got a new cisco 4900M and Im trying connect it via management port.
I ve set fastethernet ip address. When  I try to ping i cant get any answers.
When i do "sh ip int brief" Fastethernet shows up.I tried both with cross and straight cable.
What am I missing?

Here is my running config
!
ip vrf forwarding mgmtVrf
ip tacacs source-interface FastEthernet1
!
ip subnet-zero
!
!
ip vrf mgmtVrf
!
vtp mode transparent
!
!
interface FastEthernet1
ip vrf forwarding mgmtVrf
ip address 10.119.50.4 255.255.255.0
speed auto
duplex auto
!

interface Vlan1

no ip address

!
no ip http server

ip http secure-server

!


 
LVL 1
asyabAsked:
Who is Participating?
 
asyabAuthor Commented:
i dont know why but i can reach via management port. thx everyone for help.
0
 
Istvan KalmarHead of IT Security Division Commented:
if you configured VRF you need:

ping vrf mgmtVrf x.x.x.x
0
 
asyabAuthor Commented:
ok. but i cannot ping from my pc either.
0
Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

 
Istvan KalmarHead of IT Security Division Commented:
why did you configured VRF?
0
 
asyabAuthor Commented:
i didnt it is default and u cannot remove.
0
 
Istvan KalmarHead of IT Security Division Commented:
forget, it is a mgmt port...

Please put this subnet your PC, and you able to reach it...
0
 
asyabAuthor Commented:
they are on both same subnet
My pc ip address 10.119.50.5/24
0
 
Istvan KalmarHead of IT Security Division Commented:
ok you able to ping from the PC?
0
 
Don JohnstonInstructorCommented:
Can you ping the PC from the switch?

ping vrf  mgmtVrf 10.119.50.5

Also, please post the complete config.

0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.