nkarim
asked on
HP Proliat ML150 g6
Hi all on fresh install of windows2003 server Std edition this error i get :The following Value in the .SIF file used by setup is corrupted or missing:
Value 1 on line 0 in section [keyboard] setup canot continue to quit setup press f3
And server locks up i have flashed Bios,Hp smart array P410/256 controllerAnd HP Tech support have no idea how to fix this and they are sending me a new cd-rom drive to resolve this issue please help....Thanks a million in advance.
Value 1 on line 0 in section [keyboard] setup canot continue to quit setup press f3
And server locks up i have flashed Bios,Hp smart array P410/256 controllerAnd HP Tech support have no idea how to fix this and they are sending me a new cd-rom drive to resolve this issue please help....Thanks a million in advance.
I am guessing you have tried different media? Is it a burned disk? Is it a custom ISO?
ASKER
Encrypted1024 and bryoni44035v3 I have tried three diffrent media all by microsoft and also new keyboards too.Thanks
have you tried usb keyboards and ps2 keyboards? how about an hp branded keyboard?
(others have said that worked for them in this specific issue)
(others have said that worked for them in this specific issue)
Check the RAM and the optical drive. An easy way to test is get a USB cd ROM, diable the internal one in the BIOS. if the software installs, it's the CD-ROM, if not, replace the RAM.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
What do ou do if you don't have a flopphy drive???
do the process over from scratch with the new keyboard (of course, connect it when the server is powered off)