taherudin
asked on
Cisco CME ephone-dn XX octo-line
I have Cisco CME operator is cant transfer if receive more then two line, means if his busy line 1, and arrived 2 line he can answer but cant transfer, when he press transfer softkey getting internal dial tone but cant dial internal extension number my config bellow
!
ephone 3
no phone-ui speeddial-fastdial
no multicast-moh
mac-address EC44.761E.5975
type 7940
button 1:76
!
ephone-dn 76 octo-line
number 175
preference 0 secondary 9
huntstop
huntstop channel 8
call-forward busy 777
call-forward noan 777 timeout 40
call-waiting beep
cor incoming USR-MN-INTERNATIONAL
no cti notify
no cti watch
!
any one can help
Regards
Taher
!
ephone 3
no phone-ui speeddial-fastdial
no multicast-moh
mac-address EC44.761E.5975
type 7940
button 1:76
!
ephone-dn 76 octo-line
number 175
preference 0 secondary 9
huntstop
huntstop channel 8
call-forward busy 777
call-forward noan 777 timeout 40
call-waiting beep
cor incoming USR-MN-INTERNATIONAL
no cti notify
no cti watch
!
any one can help
Regards
Taher
Try changing the huntstop channel to 6 or 7 to keep one channel open for transfers.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.