unrinoceronte
asked on
Dell Workstation_Ram Memory_Set proper timings
This is a follow up question from this one:
https://www.experts-exchange.com/questions/26010032/BAD-RAM-Memory-modules.html
Nobus and Callandor suggested me to " look for the proper timings, and voltage for them, and set them accordingly." , " I agree with nobus that 4 modules may be causing signal degradation; you can compensate by relaxing the memory timings in the BIOS, but you would have to experiment to find the best settings. " ....
So, i dont know how to do this, and if this will solve my problem, can someonte help me with these? Nobus? Callandor?
I went onto BIOS setup, (F2, F12 ... i dont remember) , and there was NO option to do this, the only thing on Memory is MEMORY INFORMATION, nothing that i can change... I guess DELL locks this features... Can there be a workaround for this??
thanks
https://www.experts-exchange.com/questions/26010032/BAD-RAM-Memory-modules.html
Nobus and Callandor suggested me to " look for the proper timings, and voltage for them, and set them accordingly." , " I agree with nobus that 4 modules may be causing signal degradation; you can compensate by relaxing the memory timings in the BIOS, but you would have to experiment to find the best settings. " ....
So, i dont know how to do this, and if this will solve my problem, can someonte help me with these? Nobus? Callandor?
I went onto BIOS setup, (F2, F12 ... i dont remember) , and there was NO option to do this, the only thing on Memory is MEMORY INFORMATION, nothing that i can change... I guess DELL locks this features... Can there be a workaround for this??
thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
note that you may have one or more bad rram slots - the only option then is to install the max allowed sized sticks
ASKER
thanks nobus
ASKER
By the way, i have tried using fewer Ram modules (I tried 4 and also 2) but always i have the bad results with Memory Diagnostics... The only time i get no erros with Dell Diagnostics is when i use 1 Module... but i can not work with only 1 module because of my heavy 3D applications).