need help to establish vpn tunnel

Dear all,

i am trying to establish a VPN tunnel between two branches. my site and using asa 5510 and the other site is using a Huawi products.

i was checking my log and i got this


3|Apr 28 2010 12:56:23|713902: Group = 2.2.2.185, IP = 2.2.2.185, Removing peer from peer table failed, no match!

6|Apr 28 2010 12:56:19|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.

6|Apr 28 2010 12:56:13|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.

6|Apr 28 2010 12:56:08|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.

6|Apr 28 2010 12:56:07|713905: Group = 2.2.2.185, IP = 2.2.2.185, P1 Retransmit msg dispatched to MM FSM

5|Apr 28 2010 12:56:07|713201: Group = 2.2.2.185, IP = 2.2.2.185, Duplicate Phase 1 packet detected.  Retransmitting last packet.

6|Apr 28 2010 12:56:02|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.

4|Apr 28 2010 12:55:59|713903: IP = 2.2.2.185, Header invalid, missing SA payload! (next payload = 4)

5|Apr 28 2010 12:55:57|713041: IP = 2.2.2.185, IKE Initiator: New Phase 1, Intf 3, IKE Peer 2.2.2.185  local Proxy Address 10.100.0.0, remote Proxy Address 10.73.0.0,  Crypto map (WAN_map)

4|Apr 28 2010 12:55:56|713903: Group = 2.2.2.185, IP = 2.2.2.185, Error: Unable to remove PeerTblEntry

3|Apr 28 2010 12:55:56|713902: Group = 2.2.2.185, IP = 2.2.2.185, Removing peer from peer table failed, no match!



any idea ?


3|Apr 28 2010 12:56:23|713902: Group = 2.2.2.185, IP = 2.2.2.185, Removing peer from peer table failed, no match!
6|Apr 28 2010 12:56:19|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
6|Apr 28 2010 12:56:13|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
6|Apr 28 2010 12:56:08|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
6|Apr 28 2010 12:56:07|713905: Group = 2.2.2.185, IP = 2.2.2.185, P1 Retransmit msg dispatched to MM FSM
5|Apr 28 2010 12:56:07|713201: Group = 2.2.2.185, IP = 2.2.2.185, Duplicate Phase 1 packet detected.  Retransmitting last packet.
6|Apr 28 2010 12:56:02|713219: Group = 2.2.2.185, IP = 2.2.2.185, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
4|Apr 28 2010 12:55:59|713903: IP = 2.2.2.185, Header invalid, missing SA payload! (next payload = 4)
5|Apr 28 2010 12:55:57|713041: IP = 2.2.2.185, IKE Initiator: New Phase 1, Intf 3, IKE Peer 2.2.2.185  local Proxy Address 10.100.0.0, remote Proxy Address 10.73.0.0,  Crypto map (WAN_map)
4|Apr 28 2010 12:55:56|713903: Group = 2.2.2.185, IP = 2.2.2.185, Error: Unable to remove PeerTblEntry
3|Apr 28 2010 12:55:56|713902: Group = 2.2.2.185, IP = 2.2.2.185, Removing peer from peer table failed, no match!

Open in new window

LVL 5
KETTANEHAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

surbabu140977Commented:
You need to paste relevant vpn config from both the routers to get a solution, these logs are too generic in VPN  environment. There is a mismatch/problem in vpn config, which we cannot figure out, till both configs are pasted.

Best,




0
ptchubaCommented:
If I were you, I'd check my Phase 1 configurations.
0
KETTANEHAuthor Commented:
i am going to check the configuration and update you back
0
KETTANEHAuthor Commented:
i'd re-configured the tunnel but from cli. it's working now

mostly the issue was misconfiguration between both sides
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Cisco

From novice to tech pro — start learning today.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.